“SilentiumPC Regnum RG3 jest obudową przestronną, w której łatwo zadbać o porządek w okablowaniu i zapewnia najwyższą kulturę pracy (najcichsza). Niestety nieco odbiło się to na wynikach fabrycznej wentylacji, ta jest nieco słabsza z powodu zabudowanego frontu. W tym względzie jednak lepiej wypadają modele z filtrem siateczkowym z przodu. Wyposażenie przedniego panelu portów I/O jest dobre, na uwagę zasługuje wbudowany czytnik kart.”

“Overall, the SilentiumPC Fortis 3 MCE is a decent cooler with a very aggressive price point. While the SilentiumPC Fortis 3 MCE is an affordable model aiming at the mid-range market, it comes with impressive manufacturing quality as well as decent performance, comparing it to similarly priced offerings from competitors.”

“I jak sami widzieliście na testach naprawdę warto. Fera 3 potrafi w porównaniu do boxowego chłodzenia Intela jak również do innych schładzaczy, które testowałem. Myślę, że warto kupić tą Ferę 3 za te około 100 złotych, nawet poświęcając przełożenie zakupu zestawu komputerowego o około dwa tygodnie […]. Ale dla świętego spokoju swojego i szczególnie Waszych domowników, bo jak pewnie w nocy gracie, to macie założone słuchawki, ale oni nie, więc myślę że to będzie opłacalny zakup. Poza tym cisza jest naprawdę bezcenna.”

Sorry, this entry is only available in Polish.

Alea S35W represents a gaming-cube type chassis from SilentiumPC. It fuses flexibility with simple yet classy exterior design. Transparent widows on both sides allow for showcasing precious components of your beloved gaming rig.

Impressively roomy interior features a dual-chamber design for smart thermal management and support up to micro-ATX motherboards. There are virtually no limitations in choosing other components as the M50 will fit up to 300 mm long graphics cards and massive 185 mm CPU coolers. Users can also install up to 4 × 2,5” HDD/SSD or 2 × 2,5” SSD + 2 × 3,5” HDD.

As an enthusiasts-oriented chassis the Alea S35W puts emphasis on airflow with 200 mm intake fan in the front and 120 mm white-LED fan in the back for exceptional cooling performance.

For extra connectivity options the case comes equipped with SDXC Card Reader and USB 3.0 ports.

Key features:

• Transparent windows on both side panels for showing off the components
• Up to 3 cooling fans, comes with two pre-installed 1 × 200 mm and 1 × 120 mm
• Supports full-ATX power supplies and up to 300 mm long VGA cards
• Supports 185 mm high CPU coolers
• Features a built-in SD/SDXC and microSD Card Reader & USB 3.0 port

Tech specs:

• Dimensions: 350(H) × 375(L) × 265(W) mm
• Motherboard support: mATX / mini-ITX
• PSU: ATX standard (not included)
• Expansion slots: 4
• Net weight: 3.89 kg
• Drive bays:
  • External: none
  • Internal (up to four drives):
    • 2 × 2.5″
    • 2 × 3.5″ or 2 × 2.5″
• Maximum VGA card length: 300mm
• Maximum CPU cooler height: 185mm
• Cooling system (up to five fans in total):
  • Front: included 1 × 200mm intake fan (@ 700 RPM) or optional 2 × 120mm fan
  • Rear: included 1 × 120mm exhaust fan (@ 1200 RPM, White LED)
• Front panel interface:
  • 2 × USB 3.0
  • 1 × USB 2.0
  • 1 × Headphone jack (HD audio)
  • 1 × Microphone jack (HD audio)
  • 1 × SDXC Card Reader

Additional information:

• Warranty: 24 months
• Product code: SPC150
• EAN Code: 5904730204446
• Retail package dimensions: 42 × 32.5 × 41 cm
• Gross weight: 4.95 kg
• Quantity per pallet: minimum 24 pcs.

Alea S25W Pure Black represents a gaming-cube type chassis from SilentiumPC. It fuses flexibility with simple yet classy exterior design. Transparent widows on both sides and top panel allow for showcasing precious components of your beloved gaming rig.

Impressively roomy interior features a dual-chamber design for smart thermal management and support up to microATX motherboards. There are virtually no limitations in choosing other components as the M50 will fit up to 300 mm long graphics cards and massive 185 mm CPU coolers. Users can also install up to 4 × 2,5” HDD/SSD or 2 × 2,5” SSD + 2 × 3,5” HDD.

As an enthusiasts-oriented chassis the Alea S25W puts emphasis on airflow with 200 mm intake fan in the front and 120 mm white-LED fan in the back for exceptional cooling performance.

For extra connectivity options the case comes equipped with SDXC Card Reader and USB 3.0 ports.

Key features:

• Transparent windows on both side panels and on top panel for showing off the components.
• Up to 3 cooling fans, comes with two pre-installed 1 × 200 mm and 1 × 120 mm.
• Supports full-ATX power supplies and up to 300 mm long VGA cards.
• Supports 185 mm high CPU coolers.
• Features a built-in SD/SDXC od microSD Card Reader & USB 3.0 port.

Tech specs:

• Dimensions: 335 (H) × 360(L) × 270(W) mm
• Motherboard support: mATX / mini-ITX
• PSU: ATX standard (not included)
• Expansion slots: 4
• Net weight: 3.67 kg
• Drive bays:
  • External: none
  • Internal (up to four drives):
    • 2 × 2.5″
    • 2 × 3.5″ or 2 × 2.5″
• Maximum VGA card length: 300 mm
• Maximum CPU cooler height: 185 mm
• Cooling system (up to five fans in total):
  • Front: included 1 × 200 mm intake fan (@ 700 RPM) or optional 2 × 120 mm fan
  • Rear: included 1 × 120 mm exhaust fan (@ 1200 RPM, White LED)
• Front panel interface:
  • 2 × USB 3.0
  • 1 × USB 2.0
  • 1 × Headphone jack (HD audio)
  • 1 × Microphone jack (HD audio)
  • 1 × SDXC Card Reader

Additional information:

• Warranty: 24 months
• Product code: SPC149
• EAN Code: 5904730204439
• Retail package dimensions: 42 × 32 × 38 cm
• Gross weight: 4.73 kg
• Quantity per pallet: minimum 28 pcs.

“Radiator o klasycznej konstrukcji z dwiema parami ciepłowodów. Jego zaletą jest bardzo łatwa instalacja na procesorach AMD (wystarczy zapiąć sprężynę) oraz układach Intela (w otworach płyty trzeba zamontować specjalną ramkę). Skuteczność zestawu nie jest najwyższa, ale wyróżnia go cicha praca, a producent deklaruje żywotność 50 tys. godzin.”

MichuPC przygotował poradnik jak ułożyć okablowanie w obudowie SilentiumPC Regnum RG1W, zobacz film:

Serwis Video Blog Tech przygotował serię filmów na temat budowy wydajnego PC-a, którego komponenty chłodzone są cieczą. Wykorzystał obudowę Aquarius X95W oraz zasilacz Enduro FM1 650W:

Sorry, this entry is only available in Polish.

Maciej “Urban” Nowak przetestował obudowy SilentiumPC Alea M25W oraz M35W. Doceniono walory wizualne i atrakcyjną cenę. Obejrzyj materiał filmowy:

The Grandis 2 XE1436 is the pinnacle of SilentiumPC CPU cooler lineup. This dual-radiator monster offers stellar cooling potential for the hottest processors on the market. The performance comes from massive heat dissipation area and the XE Technology, an additional solid copper heat spreader that transmits the heat from the CPU more efficiently to all six Φ6mm U-shaped heat-pipes unleashing their full potential.

The Grandis 2 comes bundled with two exceptionally quiet PWM-controlled fans generating only up to 21 dBA at their maximum speed: Sigma PRO 140L (140 mm) and Sigma PRO 120 (120 mm). Extra mounting clips for the third, optional 120 mm fan are also included in the package alongside the high-performance Pactum PT-2 thermal compound. Robust, mounting system using a backplate ensures optimal pressure between the base and the CPU as well as quick and stratpaightforward installation.

Despite the overall dimensions the optimized height allows the cooler to be mounted in every PC case at least 186mm wide. With the ability of cooling down any type of CPU on the market the Grandis 2 XE1436 is an obvious choice for overclockers, hardcore gamers and professionals seeking total silence for powerful PC’s.

Highlights:

• Dual-radiator design for massive heat dissipation area and cooling potential
• XE Technology – solid copper heat spreader maximizes potential of all six Φ6mm heat-pipes
• Two ultra-silent PWM-controlled fans: Sigma PRO 140L (140 mm) oraz Sigma PRO 120 (120 mm), generate only 13 and 15 dBA respectively at max speed
• Secure mounting system ensures optimal pressure and straightforward installation
• Multi-socket compatibility – support for all modern Intel & AMD platforms
• High performance Pactum PT-2 thermal compound included
• Extra pair of fan mounting clips included for optional triple-fan configuration
• Designed to fit all ATX cases at least 186mm wide

 Tech specs: 

• Overall dimensions: 130 x 105 x 159 mm
• Overall weight: 1.03 kg
• Cooling fan type #1: Sigma PRO 140L PWM (140 mm)
• Cooling fan type #2: Sigma PRO 120 PWM (120 mm)
• Fan size #1: 140 x 140 x 25 mm
• Fan size #2: 120 x 120 x 25 mm
• Bearing type: Hydraulic
• Rated Voltage: 12V
• Rated Current of fan #1: 0.08 A
• Rated Current of fan #2: 0.13 A
• Air Flow of fan #1: max. 58.00 CFM
• Air Flow of fan #2: max. 46.50 CFM
• Noise level: max. 21 dBA
• Fan Speed #1: 500 ~ 1000 +/-10%
• Fan Speed #2: 500 ~ 1600 +/-10%
• MTBF: 50 000 hours
• Connector: 4Pin PWM
• TDP: max 250 W

Compatibility:

AMD:

• AM2(+)
• AM3(+)
• FM1
• FM2
• FM2+

Intel:

• Intel LGA 775
• Intel LGA 1150
• Intel LGA 1151
• Intel LGA 1155
• Intel LGA 1156
• Intel LGA 1366
• Intel LGA 2011
• Intel LGA 2011-3

Video presentation:

Set includes:

Additional information: 

• Warranty: 24 months
• EAN Code: 5900308750131
• Vendor Code: SPC099

Installation videos:

Intel LGA115x / LGA775

Intel LGA 2011 / LGA 2011-3

AMD

VS Low Profile RAM

Grandis 2 + third additional fan

SPC Gear, nowa marka sprzętu dla graczy, wprowadza na rynek fotele z serii SR300 oraz SR500. Stworzone zostały by poprawić ergonomię, komfort pracy i rozrywki, co jest szczególnie ważne dla osób, które spędzają długie godziny przy komputerze.

Nie byłoby to możliwe bez specjalnego, ergonomicznego kształtu oraz dodatkowych poduszek (na odcinku lędźwiowym oraz szyjnym), które pomagają utrzymać właściwą pozycję siedzącą. Pomaga w tym również zimna pianka, z której wykonano siedzisko i oparcie. Zachowuje ona odpowiedni kształt nawet po długim czasie użytkowania.

Fotele SPC Gear z serii SR300 oraz SR500 korzystają ze wzmocnionego, stalowego szkieletu. Utrzymuje on całą konstrukcję i zapewnia stabilne użytkowanie nawet przy maksymalnym odchyleniu siedziska – do 170 stopni. Obie serie foteli zostały wyposażone w miękkie kółka, które nie rysują podłogi.
Kubełkowy design nawiązuje do sportowych foteli samochodowych, które znane są z wygody oraz atrakcyjnego wyglądu. Dzięki temu fotele SPC Gear wyróżniają się na tle typowego wyposażenia biura lub pokoju gracza.

SPC Gear SR300 – elementy charakterystyczne
Fotel SPC Gear SR300 korzysta z mechanizmu TILT umożliwiającego bujanie. Użytkownik ma możliwość regulacji wysokości siedziska oraz kąta odchylenia oparcia, a podłokietniki 2D może regulować w pionie.

Dostępne są trzy wersje kolorystyczne foteli SR300 wykonane z ekologicznej skóry: biała, czerwona i czarna. Dla tych, którzy mają inne preferencje, dostępna jest jeszcze wersja SR300F wykonana z wysokiej jakości materiału tapicerskiego.

SPC Gear SR500 – elementy charakterystyczne
Fotel SPC Gear SR500 korzysta z mechanizmu MULTILOCK, który umożliwia bujanie, ale z opcją blokady w jednej z pięciu wybranych pozycji.
Zaawansowane podłokietniki 4D umożliwiają sterowanie w wielu płaszczyznach: góra/dół, przesuwanie w lewo/prawo, przesuwanie przód/tył oraz rotowanie w lewo/prawo.

Dostępne są trzy wersje kolorystyczne foteli SR500 wykonane z ekologicznej skóry: czarno-czarną, czarno-czerwoną oraz czarno-białą. Dla tych, którzy mają inne preferencje do tyczące wykończenia, dostępna jest jeszcze wersja SR500F wykonana z wysokiej jakości materiału tapicerskiego.

Cechy modelu SR300/F:

• Kubełkowy design, ergonomiczny kształt.
• Stalowa konstrukcja (szkielet).
• Siedzisko i plecy wypełnione z zimnej pianki (nie odkształca się po czasie).
• Wytrzymała skóra ekologiczna. Wysokiej jakości materiał tapicerski w SR300F.
• Możliwość odchylenia oparcia do 170°.
• Mechanizm TILT – możliwość bujania.
• Podłokietniki 2D – sterowanie góra/dół.
• Dwie poduszki w zestawie (pod odcinek szyjny i lędźwiowy).
• Stalowa podstawa.
• Regulacja wysokości siedziska – podnośnik klasy 4 (do 120 kg).
• Miękkie kółka, które nie rysują podłogi.

Cechy modelu SR500/F:

• Kubełkowy design, ergonomiczny kształt.
• Stalowa konstrukcja (szkielet).
• Siedzisko i plecy wypełnione z zimnej pianki (nie odkształca się po czasie).
• Wytrzymała skóra ekologiczna. Wysokiej jakości materiał tapicerski w SR500F.
• Możliwość odchylenia oparcia do 170°.
• Mechanizm MULTILOCK – możliwość bujania z opcją blokady w jednym z pięciu pozycji.
• Podłokietniki 4D – sterowanie góra/dół, przesuwanie w lewo/prawo, przesuwanie przód/tył oraz rotowanie w lewo/prawo.
• Dwie poduszki w zestawie (pod odcinek szyjny i lędźwiowy).
• Wzmocniona aluminiowa podstawa.
• Regulacja wysokości siedziska – podnośnik klasy 4 (do 120 kg).
• Miękkie kółka, które nie rysują podłogi.

Rekomendowane ceny:

• SR300/F: 800 zł
• SR500/F: 1000 zł

Więcej informacji:
Fanpage: https://www.facebook.com/spcgear/
Prezentacje wideo: https://www.youtube.com/channel/UC0r6tHhTmv2riIa4PLi_DCw

With extremely compact footprint the SilentiumPC Brutus M10 Pure Black delivers ultimate value for money for system integrators and users on a budget.

Black coated interior is surprisingly spacious allowing to accommodate high-end components including full-size ATX motherboards, up to 320mm long graphics cards and up to 159mm high CPU coolers (like Fera 3 or Fortis 3). Apart from a single 5,25” drive bay there are spaces for three 2,5” drives and two 3,5” drives. Proper airflow is ensured by a single 80mm fan in the rear and large mesh dust filter in the front panel.

For added practicality the Brutus M10 features an front-mounted SD/microSD card reader and a two high-speed USB3.0 ports. The M10 also meets security requirements for office use as it is compatible with padlock and accessories compatible with Kensington lock.

Highlights:

• Compact, mini-tower footprint with full-ATX capabilities
• Top-mounted PSU for enhanced compatibility with short-cable units
• One quiet 80mm cooling rear fan included
• Compatible with 159mm high CPU coolers and graphics cards up to 320mm long
• Front-mounted SD/microSD card reader & two USB 3.0 USB SuperSpeed ports
• Support for padlock & Kensington lock

 Tech specs: 

• Dimensions: 415(H) x 361(L) x 193(W)mm
• Motherboard support: ATX / mATX / mITX
• PSU: ATX standard (not included)
• Expansion slots: 7
• Net weight: 2.7 kg
• Drive bays:
  • External: 1 x 5.25″
  • Internal: 3 x 2.5” + 2 x 3.5”
• Maximum VGA card length: 320mm
• Maximum CPU cooler height: 159mm
• Cooling system (up to six fans in total, one included):
  • Front: 1 x 120mm fan (optional)
  • Rear: 1 x 80mm fan (included) OR 1 x 92mm (optional)
• Front panel interface:
  • 2 x USB 3.0
  • 1 x SD/SDXC/microSD Card Reader
  • 1 x Headphone jack (HD audio)
  • 1 x Microphone jack (HD audio)

Additional information:

• Warranty: 24 months
• EAN Code: 5904730204538
• Vendor Code: SPC159
• Pallet q-ty: 40 pcs.

Sorry, this entry is only available in Polish.

In response to numerous requests from users we are introducing side panel with window compatible with listed cases: Gladius M35/W Pure Black, Pax M70 Pure Black and Aquarius X70W Pure Black.

PC hardware is not just grey and unattractive any more. Today producers, apart from high performance, offer components that look also attractive. Traditional side panels keep these components hidden, but now it can change with this window kit.

Big side window allows to see installed hardware and is more and more desired by computer enthusiasts, and new side panel with window for SilentiumPC cases gives them ability to showcase their PC. Side panel with big and wide window with dimensions of 31,1 cm x 34 cm allows for great exposure of PC hardware. Especially if user will decide to install LED lighting.

Main features of SilentiumPC side panel:

• Compatible with three different cases:
  • Gladius M35/W,
  • Aquarius X70W,
  • PAX M70 Pure Black.
• Big window with dimensions of 315 × 340 mm (Width × Height)

Technical data of SilentiumPC side panel:

• Model: SilentiumPC window kit (SPC160)
• Dimensions: 430 × 427 mm (Width × Height)
• Window dimensions: 315 × 340 mm (Width × Height)

SilentiumPC Regnum RG2 Pure Black is cost-effective, well equipped chassis which offers high airflow at the same time. Its main feature is modern, dual-chamber internal layout and that helps keeping everything intact: power supply along with the cables is isolated from main components and therefore it’s easy to manage the cables and ensure PC components are as cool as possible

There are few things to point out on front panel: big power button, little reset button, two USB 3.0 connectors and audio connectors (those let you connect your microphone and headphones). Regnum RG2 Pure black offers one external 5,25″ drive bay as well as two 3,5″ and two 2,5″ internal drive bays desired for HDD/SSD configurations.

The chassis comes equipped with two quiet 120 mm fans spinning at no more than 1100 RPM – one of them is located at the front, behind the dust filter and the second is on the back of the case. As for the dust filters – there’s another one which covers power supply intake. Should additional airflow be required up to six 120 mm fans in total can be installed. Roomy interior of Regnum RG2 is compatible with mini-ITX, mATX and ATX motherboards, long power supplies (up to 260 mm including cable connectors), long graphics cards (up to 380 mm) and CPU coolers which can be as much as 160 mm high. Case in question is also compatible with both single and dual radiator used in all-in-one liquid cooling solutions.

Video:

Key features:

• Very high air flow, two 120 mm fans included (additional 4 can be mounted),
• two dust filters included (front panel and under power supply),
• SD/microSD card reader, two USB 3.0 connectors and audio connectors on front panel,
• dual-chamber internal layout for improved airflow and cable management,
• compatibility with large graphics cards (up to 380 mm) and high CPU coolers (up to 160 mm).

Installation manual:

download product manual

Technical data:

• Dimensions (L×H×W): 441×447×208 mm
• Motherboard support: mini-ITX/mATX/ATX
• Net weight: 4,5 kg
• Drive bays:
  • External:
    • 1 × 5,25”
  • Internal:
    • 2 × 2,5″
    • 2 × 3,5”
• Expansion slots: 7
• Maximum VGA card lenght: 380 mm
• Maximum CPU cooler height: 160 mm
• Cooling system (up to six fans in total, two included):
  • Front: 1 × 120 mm fan 1100 rpm included. Ability to mount three fans as long as third one replaces 5,25″ drive bay.
  • Rear: 1 × 120 mm fan 1100 rpm included.
  • PSU chamber: two optional 120 mm fans (not included).
• Front panel interface:
  • 2 × USB 3.0 (internal connection)
  • SD/microSD card reader
  • 1 × Headphone jack (HD audio)
  • 1 × Microphone jack (HD audio)
• PSU (ATX PS2 standard): not included

Additional information:

• Kod produktu: SPC161
• EAN: 5904730204637

Attention: set does not include PC components as motherboard, CPU, memory, GPU, power supply or drives.

SilentiumPC Regnum RG2W Pure Black is cost-effective, well equipped chassis which offers high airflow at the same time and it lets you show off with your PC through side window. Its main feature is modern, dual-chamber internal layout and that helps keeping everything intact: power supply along with the cables is isolated from main components and therefore it’s easy to manage the cables and ensure PC components are as cool as possible.

There are few things to point out on front panel: big power button, little reset button, two USB 3.0 connectors and audio connectors (those let you connect your microphone and headphones). Regnum RG2 Pure black offers one external 5,25″ drive bay as well as two 3,5″ and two 2,5″ internal drive bays desired for HDD/SSD configurations.

The chassis comes equipped with three quiet 120 mm fans spinning at no more than 1100 RPM – two of them are located at the front, behind the dust filter and third one (LED one) is on the back of the case. As for the dust filters – there’s another one which covers power supply intake. Should additional airflow be required up to six 120 mm fans in total can be installed. Roomy interior of Regnum RG2 is compatible with mini-ITX, mATX and ATX motherboards, long power supplies (up to 260 mm including cable connectors), long graphics cards (up to 380 mm) and CPU coolers which can be as much as 159 mm high. Case in question is also compatible with both single and dual radiator used in all-in-one liquid cooling solutions.

Video:

Key features:

• Excellent air flow, three 120 mm fans included (additional 3 can be mounted),
• big side window,
• two dust filters included (front panel and under power supply),
• SD/microSD card reader, two USB 3.0 connectors and audio connectors on front panel,
• dual-chamber internal layout for improved airflow and cable management,
• compatibility with large graphics cards (up to 380 mm) and high CPU coolers (up to 159 mm).

Installation manual:

download product manual

Technical data:

• Dimensions (L×H×W): 441×447×198 mm
• Motherboard support: mini-ITX/mATX/ATX
• Net weight: 4,5 kg
• Drive bays::
  • External:
    • 1 × 5,25”
  • Internal:
    • 2 × 2,5″
    • 2 × 3,5”
• Expansion slots: 7
• Maximum VGA card lenght: 380 mm
• Maximum CPU cooler height: 159 mm
• Cooling system (up to six fans in total, three included):
  • Front: 2 × 120 mm fans 1100 rpm included. Y-type fan splitter included gives ability to connect both fans to single connector on motherboard. Ability to mount three fans as long as third one replaces 5,25″ drive bay.
  • Rear: 1 × 120 mm LED fan 1100 rpm included.
  • PSU chamber: two optional 120 mm fans (not included).
• Front panel interface:
  • 2 × USB 3.0 (internal connection)
  • SD/microSD card reader
  • 1 × Headphone jack (HD audio)
  • 1 × Microphone jack (HD audio)
• PSU (standard ATX PS2): not included

Additional information:

• Product code: SPC162
• EAN: 5904730204644

Attention: set does not include PC components as motherboard, CPU, memory, GPU, power supply or drives.

The base for PSU SilentiumPC Supremo L2 Gold V2 is a platform offering stable voltage and very high energy efficiency (up to 91%), which is certified with 80 PLUS®Gold (measurement done at 115V 60 Hz). In practice it means that generated costs, temperatures, and noise levels are all significantly lower than those observed in typical power units.